Plant Therapy Metro Stone Diffuser

Remove the top cover and power supply cord from the base unit. Add water into the reservoir until it reaches the maximum water level indicator. Add the recommended amount of drops for your essential oil or essential oil blend, which can be located on the backside of every Plant Therapy essential oil bottle. Replace the top cover and connect the diffuser to a power source by plugging it in.

Mist Button:
Press once for continuous mist. The diffuser will automatically shut off when the water level becomes too low. Press twice for 2 hours of continuous mist. Press three times for 15 seconds on/ 30 seconds off, until the water level becomes too low. Press four times for 15 minutes on/ 30 minutes off, until the water level becomes too low. Press five times for 30 minutes on/ 30 minutes off, until the water level becomes too low. Press six times to shut off.

A slight difference in mist amount produced by different units is expected. Factors affecting the mist amount: water, humidity, temperature, and air flow. There is an automatic shut-off function when the diffuser detects the water is empty or when it is tipped over.

Light Button:
Press once to turn the light on. Press twice to dim the light to 50%. Press three times to turn the light off.

Always disconnect the AC adapter from the device and power off the device before cleaning. Hold the base and pull off the top part of the diffuser. Remove reservoir cover. Pour any remaining water from the reservoir, being careful as to not spill water into the DC Socket or Air Inlet at the bottom of the diffuser.

How To Clean:
Use a clean cloth and a combination of water and distilled white vinegar to wipe down the reservoir. Then rinse with clean water and wipe dry with a cloth. We recommend cleaning your diffuser twice a week when used regularly.